extrusion & injection grade HDPE from China manufacturer - Hebei Jiacheng Metal Wire & Mesh Manufacture Co,Ltd

Price:	950.0~1150.0 USD
Payment Terms:	T/T,L/C,D/A,D/P,WU
Place of Origin:	Liaoning, China (Mainland)


	Add to My Favorites
HiSupplier Escrow	Share \|

Product Detail

Model No.: extrusion grade , injection...

Production Capacity: 4000 ton per month

Delivery Date: 10 days

Brand Name: jc

Purity: 100%

melting point: 142℃

relative density: 0.941-0.960

Means of Transport: Ocean,Land,Air

Packing: 25kg a bag, 18 ton a 20'fcl...

Classification: Others

CAS No.: 9002-88-4

specific gravity: 0.941~0.960

decomposition temperature: 300℃

density: 0.940-0.976 g/cm3

HDPE primarily used for extrusion application such as flat Yarn, coarse monofilament, film & sheets and injection molding such as pallets, crates,

Extrusion & injection grade HDPE

HDPE:

HDPE cable material Property	Unit	Typical Value
Mass density	g/cm 3	0.941-0.959
Melt flow Rate(190 centidegree /2.16kg)	g/10min	≤1.0
Tensile yield strength	MPa	≥19.0
Flexural modulus	Mpa	≥965
Elongation@ break	%	≥400
Impact Embrittlement temperature	centidegree	MAX -118
Dielectric Constant	100KHZ	2.32
Dielectric Constant	1MHZ	2.31
Loss Tangent	100KHZ	MAX 0.0001
Loss Tangent	1MHZ	MAX 0.0001
Volume resistivity	OHM-CM	MIN 1x10 15
Application	Mainly used for the production of high toughness of the telephone,cable insulation material

LDPE:

Physical Properties		Test Method	Nominal Value	Unit
Density		ISO 1183	0.921	g/cm3
Melt Mass-Flow Rate (MFR)		ISO 1133	1.9	g/10min
Hardness
Shore Hardness (shore D)		ISO 868	45
Mechanical Properties
Tensile Modulus		ISO 527-2	175	MPa
Tensile Strength	Yield,	ISO 527-2	9.0	MPa
Tensile Strength	Break,	ISO 527-2	13.0	MPa
Tensile Strain(Break)		ISO 527-2	850	%
Modulus of Elasticity		Internal Method	250	MPa
Thermal
Vicat Softening Temperature		ISO 306/A50	89.0	°C
Melting Temperature (DSC)		DIN 53765	108	°C
Peak Crystallization Temperature (DSC)		DIN 53765	97.0	°C
Heat of Fusion		DIN 53765	110	J/g
Electrical
Volume Resistivity		ASTM D257	8.5E+15	ohm •cm
Dielectric Strength		ASTM D149	30.0	kV/mm
Dielectric Constant (60Hz)		ASTM D150	2.20	%
Dissipation Factor (60 Hz)		ASTM D150	0.00050

LLDPE

Properties	Test conditon	Test method	Test data	Unit
Density			0.91
MFI			2
Drop impact strength		ASTM D-1709	90	g
Elongation ,vertical/horizontal		ASTM D-882	600/800	%
tensilestrength,thermal resistance		ASTM D-1004	105/95	Kg/cm
elongation		ASTM D-638	930	%
tensile strength		ASTM D-638	180
tensile strength,vertical/horizontal		ASTM D-882	380/350
Vicat softening point		ASTM D-1525	103	°C
melting point		ASTM D-2117	126	°C
Turbidity		ASTM D-1009	12	%
45 glossness		ASTM D-2457	75	%

HDPE Raw Material,HDPE virgin granules

HDPE resins are produced with low pressure gas phase process. The products are primarily used for extrusion application such as flat Yarn, coarse monofilament, film & sheets and injection molding such as pallets, crates, bottle caps and industrial containers

Didn't find what you're looking for? Post Buying Lead or contact HiSupplier Customer Service Center for help!

Related Search

Hdpe Extrusion Hdpe Injection Hdpe Cable Grade Hdpe Pipe Extrusion Line Hdpe Pipe Extrusion Hdpe Film Extrusion More>>

Find more related products in following catalogs on Hisupplier.com

Chemicals >> Plastics & Products >> PolyEthylene Products